Page History

1. Configure your Database for Integration with your Quickbooks file. 
2. For this Tutorial I will be using use SQL Server Database Named "DBSyncDB" and 2011 US Edition of Quickbooks.
3. Create tables "accountAccount" and "invoiceInvoice" in Database with following the SQL script.

USE [DBSyncDB]

CREATE TABLE [dbo].[account](
[id] [varchar](20) NULL,[Name] [varchar](50) NULL,[firstname] [varchar](50) NULL,[lastname] [varchar](50) NULL,
[phone] [nchar](20) NULL,[fax] [nchar](20) NULL,[billingstreet] [varchar](200) NULL,[billingcity] [varchar](50) NULL,
[billingstate] [varchar](50) NULL,[billingcountry] [varchar](50) NULL,[billingcode] [varchar](50) NULL,[company] [nchar](100) NULL
) ON [PRIMARY]

GO

USE [DBSyncDB]

CREATE TABLE [dbo].[invoice](
[invoice_no] [nchar](10) NULL,[customerid] [nchar](100) NULL,[item] [nchar](100) NULL,[itemdesc] [nchar](100) NULL,
[quantity] [nchar](10) NULL,[uom] [nchar](50) NULL,[salesprice] [nchar](10) NULL,[total] [nchar](10) NULL,
[billaddress] [nchar](100) NULL,[billingcity] [nchar](100) NULL,[billingstate] [nchar](100) NULL,
[billingpostalcode] [nchar](10) NULL,[billingcountry] [nchar](100) NULL,[date] [nchar](50) NULL
) ON [PRIMARY]

GO

CREATE TABLE `dbsyncdb`.`account` (`id` VARCHAR(20) DEFAULT NULL,`Name` VARCHAR(50) DEFAULT NULL,`firstname` VARCHAR(50) DEFAULT NULL,
`lastname` VARCHAR(50) DEFAULT NULL,`phone` VARCHAR(20) DEFAULT NULL,`fax` VARCHAR(20) DEFAULT NULL,
`billingstreet` VARCHAR(200) DEFAULT NULL,`billingcity` VARCHAR(50) DEFAULT NULL,`billingstate` VARCHAR(50) DEFAULT NULL,
`billingcountry` VARCHAR(50) DEFAULT NULL,`billingcode` VARCHAR(50) DEFAULT NULL,`company` VARCHAR(100) DEFAULT NULL
)
ENGINE=INNODB DEFAULT CHARSET=utf8;

/*Table structure for table `invoice` */

CREATE TABLE `dbsyncdb`.`invoice` (`invoice_no` CHAR(10) DEFAULT NULL,`customerid` CHAR(100) DEFAULT NULL,`item` CHAR(100) DEFAULT NULL,
`itemdesc` CHAR(100) DEFAULT NULL,`quantity` CHAR(10) DEFAULT NULL,`uom` CHAR(50) DEFAULT NULL,`salesprice` CHAR(10) DEFAULT NULL,
`total` CHAR(10) DEFAULT NULL,`billaddress` CHAR(100) DEFAULT NULL,`billingcity` CHAR(100) DEFAULT NULL,
`billingstate` CHAR(100) DEFAULT NULL,`billingpostalcode` CHAR(10) DEFAULT NULL,`billingcountry` CHAR(100) DEFAULT NULL,
`date` CHAR(50) DEFAULT NULL)

ENGINE=INNODB DEFAULT CHARSET=utf8;

  CREATE TABLE "SYS"."ACCOUNT" ("id" VARCHAR(20  BYTE) DEFAULT NULL,"Name" VARCHAR(50  BYTE) DEFAULT NULL,"firstname" VARCHAR(50  BYTE) DEFAULT NULL,
"lastname" VARCHAR(50  BYTE) DEFAULT NULL,"phone" VARCHAR(20  BYTE) DEFAULT NULL,"fax" VARCHAR(20  BYTE) DEFAULT NULL,
"billingstreet" VARCHAR(200  BYTE) DEFAULT NULL,"billingcity" VARCHAR(50  BYTE) DEFAULT NULL,"billingstate" VARCHAR(50  BYTE) DEFAULT NULL,
"billingcountry" VARCHAR(50  BYTE) DEFAULT NULL,"billingcode" VARCHAR(50  BYTE) DEFAULT NULL,
"company" VARCHAR(100  BYTE) DEFAULT NULL
);

/*Table structure for table `invoice` */

CREATE TABLE "SYS"."INVOICE" ("invoice_no" CHAR(10 BYTE) DEFAULT NULL,"customerid" CHAR(100 BYTE) DEFAULT NULL,"item" CHAR(100 BYTE) DEFAULT NULL,
"itemdesc" CHAR(100 BYTE) DEFAULT NULL,"quantity" CHAR(10 BYTE) DEFAULT NULL,"uom" CHAR(50 BYTE) DEFAULT NULL,"salesprice" CHAR(10 BYTE) DEFAULT NULL,
"total" CHAR(10 BYTE) DEFAULT NULL,"billaddress" CHAR(100) DEFAULT NULL,"billingcity" CHAR(100) DEFAULT NULL,
"billingstate" CHAR(100 BYTE) DEFAULT NULL,"billingpostalcode" CHAR(10 BYTE) DEFAULT NULL,"billingcountry" CHAR(100 BYTE) DEFAULT NULL,
"date" CHAR(50 BYTE) DEFAULT NULL);

...

1. Open www.mydbsync.com in your browser and . Then, click on Customer Login.
2. Enter in your DBSync username Username and password Password to Sign in. Once logged in, click on Launch to access DBSync Integration Console.
3. Once logged into the DBSync console, click on Create New projectProject button .
4. You can use any naming convention for a project as long as there are no white spaces in the name of the projectProject.
5. Once the project Project is created, click on Connector --- Edit to configure the Connectors.
6. Click on the Create New Connector from the top right section of the page page. 
7. Enter the name for the connector Connector and select Database Adapter from the drop down. Click on Save button once done. 
8. Similarly, click on the Create New Connector button again to add Quickbooks Connector to your DBSync profile.
9. Once both the Connectors are added, you will see them listed in the connector Connector listing page.
10. Now click on the Click Edit link next to the Database Connector and enter . Enter your Database credentials as shown. In this tutorial, the database used is SQL Server 2005 and corresponding credentials are entered.

...

     11.Click on Validate link for the Database adapter. If the credentials entered are accurate, you will get a pop-up message saying the "Connection Settings are Valid". 

     12. At this point, you have successfully validated your Database Adapter.

1. Click on the Click Edit  link next to the Quickbooks Connector from the connector Connector listing page.
2. Under the file section, enter the full path of your Quickbooks file as shown.
3. You can retrieve full path/location of your Quickbooks file by pressing 'F2' key on your keyboard when in Quickbooks 'Home' page - as shown below.

     4. Click on configuration Link at the bottom of the page. A Pop-up box will appear, prompting you to open the file with "QuickBooks Web Connector (default)", click on OK button as . Click OK as highlighted below in screenshot.

      5. Click on Click OK in the next window (first screenshot below) and on the next window . Then, select the option button "Yes, always; allow access even if QuickBooks is not running" and check the check box for "Allow this application to access personal data" and click on continue button . Finally, click continue  (second screenshot below).

...

       6. In the Access Confirmation window click on the Done button as , click Done - as shown above . And the profile will get added to your QuickBooks Web Connector and a screenshot .  A screenshot of the QuickBooks Web Connector is shown below.

...

      7. Please enter your DBSync password in the password section of the Web Connector and save itSave. 
      8. At this point, you have successfully completed configuring your Quickbooks with DBSync. You can run the integration by clicking on the Update Selected button.

1. Create a project Project, Process with Names of your choices.
2. Create a Workflow with name "DB2Customer"  *and likewise create another Workflow with name "DB2QBInvoice"*. 
3. Click Edit on Edit of workflow  "DB2QBCustomer" which . This will redirect the user you to Workflow detail page.
4. Create a rule , and select rule. Then, select the Target as QuickBooks and choose the object to which you want insert/upsert the records.
5. From the Trigger section, choose the DB connector and from . From Advanced Query builder, enter the below following query , user . User can run the query and view the result in Query Designer itself.

6. If a user wishes to set the properties,

   can be done

   s/he can do it from the Properties Tab

   Code Block
   selectSelect * from account

         5. For a rule created, set the following properties by selecting the Properties Tab.

Table :  CustomerAddRq

maxbatchsize  :  1

...

     6.  Click on the Map link from the available with options under the Rule to set the following field to field maps*.*

At this point, your DBSync is set to move Account records from your database table to Quickbooks Customer.

...

1. From the Workflow listing page, click on the Edit link to open the "DB2QBInovoice" worfklow.
2. Now follow Follow the same procedure for Creating , and Configuring Rule as explained in earlier section.
3. Configure the Trigger for the DB2QBInvoice state with the following code from the Advanced query builder section.

...

    4. Make sure the XML Formatter section is filled up populated with the following code.

customerid,billaddress,billingcity,billingstate,billingpostalcode,billingcountry,date,
invoice_no,[item,itemdesc,quantity,salesprice]

...

The Rule mapping can be mapped from the below following table .

• In the above mappings, we are using the operator Type as Loop so that line items are grouped as a list. For more info on the loop operator, refer to the above XML Formatter link .

At this point, you have configured your DBSync profile to integrate both the Accounts and Invoice tables that were created in your SQL Server Database. A similar procedure can be followed for other databases like MYSQL,Oracle,DB2 etc. The only thing that would be changing different, within DBSync, would be the connection strings for the respective databases.